Device Overview

ManufacturerAeotec Limited
Manufacturer ID0371
NameZWA001
Device DescriptionBulb 6 Multi-White
CategoryLight Bulb
References (Type:Id)0003:0001,0103:0001
Firmware VersionsAll
Protocol Version4.061
Library TypeLIB_SLAVE_ENHANCED
Always ListeningYes
Frequently ListeningNo
Supports RoutingYes
Supports BeamingYes
Supports SecurityNo
Maximum Data Rate40000
Device Overview

Standard form factor and appearance of the light bulb with 800 lm output Tunable white: dimmable from 5% to 100%, tunable from 2700K to 6500K. Possible to be included in groups, scenes, or schedules Suitable for indoor lighting: Corridors, Bedroom, Living Room, etc.

Reset the device :

  • Please use this procedure only when the network primary controller is missing or otherwise inoperable.
  • Led bulb re-power 6 times (between 0.5-2 seconds each time); If the 6th power on, the led bulb flashes twice, which means that the resetting is successful.
Inclusion Information

Add for inclusion:

  • Set the Z-Wave network main controller into adding mode.
  • Power cycle once for led bulb(OFF->ON).The led bulb will flash twice and send node info frame.
  • Wait a moment, the led bulb should be added to the controller.Then the led bulb will flash once when it has been included into the network.
Exclusion Information

Remove for exclusion:

  • Set the Z-Wave network main controller into removing mode.
  • Led bulb re-power 3 times (between 0.5-2 seconds each time).
  • Wait a moment, the led bulb should be removed from the controller.Then the led bulb will flash once, dim to 5% first, and then increased to 100% after 5 seconds.
Usage Information
Basic ClassBASIC_TYPE_ROUTING_SLAVE
Generic ClassGENERIC_TYPE_SWITCH_MULTILEVEL
Specific ClassSPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
Unique Referencezwa001

Configuration Parameters

Parameter 80
Bitmask
LabelSend notifications to associated devices
DescriptionTo send notifications to (Group 1) when state change.0 = Nothing.1= Basic CC.
Word Size1
Default Value1
Allowable Range0 to 1
Overview

Enable to send notifications to associated devices(Group 1) when the state of LED Bulb is changed.0 = Nothing.1= Basic CC report.

Options
Option Value0
Option LabelDisable
Option Overview
Option Value1
Option LabelSend Basic Report to associated nodes when state
Option Overview
Parameter 81
Bitmask
LabelAdjust color temperature in warm white color comp
Descriptionavailable value: 0x0A8C-1387Warm White(0x0A8C(2700k) ~ 0x1387 (4999k))
Word Size2
Default Value2700
Allowable Range2700 to 4999
Overview

Adjusting the color temperature in warm white color component. available value: 0x0A8C-1387Warm White(0x0A8C(2700k) ~ 0x1387 (4999k))

Options
Option Value2700
Option LabelWarm White(0x0A8C(2700k) ~ 0x1387 (4999k))
Option Overview
Parameter 82
Bitmask
LabelColor temperature in cold white color comp
DescriptionAvailable value:0x1388-0x1964Cold White (0x1388 (5000k) ~ 0x1964 (6500k))
Word Size2
Default Value6500
Allowable Range5000 to 6500
Overview

Adjusting the color temperature in cold white color component. available value:0x1388-0x1964 Cold White (0x1388 (5000k) ~ 0x1964 (6500k))

Options
Option Value5000
Option LabelCold White (0x1388 (5000k) ~ 0x1964 (6500k))
Option Overview

Association Groups

Group ID1
LabelLifeline
Description
Maximum Nodes1
ControllerYes
Overview

Endpoints

Endpoint NameEndpoint 0
Endpoint Number0
Basic ClassBASIC_TYPE_ROUTING_SLAVE
Generic ClassGENERIC_TYPE_SWITCH_MULTILEVEL
Specific ClassSPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
Command Classes
Class Ver Basic NIF Sec UnSec
NO_OPERATION 1
BASIC 1
SWITCH_MULTILEVEL 2
Dimmer
SCENE_ACTIVATION 1
Scene Number
SCENE_ACTUATOR_CONF 1
COLOR 2
Color Control
Color Temperature
ASSOCIATION_GROUP_INFO 1
DEVICE_RESET_LOCALLY 1
ZWAVE_PLUS_INFO 1
CONFIGURATION 1
MANUFACTURER_SPECIFIC 1
POWERLEVEL 1
FIRMWARE_UPDATE_MD 1
ASSOCIATION 2
VERSION 2
SECURITY

Reference Documents

Device Image Aeotec-ZWA001.png
Manual LED-Bulb-Manul.pdf

First added to database on -0001-11-30 00:00:00. Current released version is 3.
Last updated by Super User on 2018-12-07 22:37:32 (2 months ago).
Approved on 2018-12-07 22:37:53, and last exported on 2018-12-09 10:54:30.

Add comment


Security code
Refresh