|Device Description||Door/Windows Sensor|
|Maximum Data Rate||40000|
Linear Z-Wave products are easy to install, and allow dealers to create an integrated wireless network with nearly limitless expansion and interoperability with security and health monitoring systems, energy management, home entertainment, appliances, and more.
The WADWAZ-1 sensor monitors a door or window and sends Z-Wave signals when the door is opened or closed.
Refer to your Controller operating instructions to add this module under the command of the Wireless Controller.
NOTE: If you have trouble adding the WADWAZ-1 to a group it may be that the Home ID and Node ID were not cleared from it after testing. You must first “RESET UNIT” with your Controller to remove it from the network. Although adding it to a group includes it in the network, removing it from a group does not remove it from the network. If removed from a group, it functions as a repeater (only). “RESET UNIT” removes it completely from the network
For “Exclusion” from (removing from) a network:
Open and then closed the cover to wakeup the device. This will also trigger the tamper alarm, which needs to be turned off manually.
|Endpoint Name||Endpoint 0|
Last updated by Brian Michalk on 2019-01-13 19:56:50 (4 months ago).
Approved on 2019-01-18 22:27:45, and last exported on 2019-01-18 22:27:46.