Device Overview

ManufacturerID Lock AS
Manufacturer ID0373
NameID-150
Device DescriptionZ wave module for ID Lock 150 and 101
CategoryLock
References (Type:Id)0003:0001
Firmware VersionsAll up to 1.5
Protocol Version4.005
Library TypeLIB_SLAVE_ENHANCED
Always ListeningNo
Frequently ListeningYes
Supports RoutingYes
Supports BeamingYes
Supports SecurityYes
Maximum Data Rate40000
Device Overview

The ID Lock Z-wave module is a security enabled Z-wave Plus product that is able to use encrypted Z-wave Plus messages in order to communicate to other Z-wave Plus products enabled security.

The module is proprietary for the ID Lock 150 and also backwards compatible with the ID Lock 101. The ID Lock Z-wave module must be used in conjunction with a Security Enabled Z-wave Controller in order to fully utilize their full capability.

The ID Lock Z-wave module can be included and operated in any Z-wave network containing certified other Z-wave products regardless of manufacturer. The ID Lock Z-wave module does not support the Basic Set Command Class.

Inclusion Information
  1. Bring the controller as close as possible to the lock unit
  2. Set the controller to inclusion mode
  3. Push and hold KEY button on the inside panel on the lock until all keys on the outside light up and a audible signal is given.
  4. Release the KEY button on the inside panel
  5. Enter your Master PIN and press * 
  6. Click 2 and then *
  7. Click 5, don't press *
  8. The LED flashes blue when inclusion is in progress
  9. The inclusion may take some time as security is required
Exclusion Information
  1. Set the controller to Exclusion mode
  2. Push and hold KEY button on the inside panel on the lock until all keys on the outside light up and a audible signal is given.
  3. Release the KEY button on the inside panel
  4. Enter your Master PIN and press * 
  5. Click 2 and then *
  6. Click 5, don't press *
  7. The LED flashes blue when exclusion is in progress
Usage Information

Configuration parameters 2 RFID Registration Configuration and 10 Retrieve RFID Information have not been added since they are only valid for the 101 model. 

Basic ClassBASIC_TYPE_ROUTING_SLAVE
Generic ClassGENERIC_TYPE_ENTRY_CONTROL
Specific ClassSPECIFIC_TYPE_SECURE_KEYPAD_DOOR_LOCK
Unique Referenceidl150

Configuration Parameters

Parameter 1
Bitmask
LabelDoor lock mode
DescriptionSet if the lock is in away mode and if automatic locking should be enabled
Word Size1
Default Value1
Allowable Range0 to 3
Overview

Auto lock Mode, Manual lock mode, Activate Away Mode, Deactivate Away Mode.

If value is 0x02 (Enable Away, Manual lock) and the door is unlocked value will be set to 0x00.

If value is 0x03 (Enable Away, Auto lock) and the door is unlocked value will be set to 0x01.

 Default Value: 1 (Disable Away/Auto Lock Mode)

Options
Option Value0
Option LabelDisable Away Manual Lock
Option Overview
Option Value1
Option LabelDisable Away Auto Lock
Option Overview
Option Value2
Option LabelEnable Away Manual Lock
Option Overview
Option Value3
Option LabelEnable Away Auto Lock
Option Overview
Parameter 3
Bitmask
LabelDoor Hinge Position Mode
DescriptionTell the lock which side your hinges are on
Word Size1
Default Value0
Allowable Range0 to 1
Overview
Options
Option Value0
Option LabelRight handle
Option Overview
Option Value1
Option LabelLeft handle
Option Overview
Parameter 4
Bitmask
LabelDoor Audio Volume Level
DescriptionSet the Audio Volume Level of the Lock
Word Size1
Default Value5
Allowable Range0 to 6
Overview
Options
Option Value0
Option LabelNo sound
Option Overview
Option Value1
Option LabelLevel 1
Option Overview
Option Value2
Option LabelLevel 2
Option Overview
Option Value3
Option LabelLevel 3
Option Overview
Option Value4
Option LabelLevel 4
Option Overview
Option Value5
Option LabelLevel 5
Option Overview
Option Value6
Option LabelMax. sound level
Option Overview
Parameter 5
Bitmask
LabelDoor ReLock Mode
DescriptionSets if the door should relock or not
Word Size1
Default Value1
Allowable Range0 to 1
Overview

With this configuration ID Lock can automatically relock the door if an already locked door gets unlocked, but remains unopened. This is avoided by deactivating relocking.

Options
Option Value0
Option LabelDisabled
Option Overview
Option Value1
Option LabelEnabled
Option Overview
Parameter 6
Bitmask
LabelService PIN Mode
DescriptionSets the validity of the service PIN
Word Size1
Default Value0
Allowable Range0 to 9
Overview

A configuration get command on this parameter returns the latest set parameter value (set by Z-wave).

This is a set only value, if changed locally on keypad these values are not changed on Z-wave module. Value 5, 6 and 7 are for future use on door lock.

Options
Option Value0
Option LabelDeactivated
Option Overview
Option Value1
Option LabelValid 1 time
Option Overview
Option Value2
Option LabelValid 2 times
Option Overview
Option Value3
Option LabelValid 5 times
Option Overview
Option Value4
Option LabelValid 10 times
Option Overview
Option Value8
Option LabelValid for 12h
Option Overview
Option Value9
Option LabelValid for 24h
Option Overview
Parameter 7
Bitmask
LabelDoor Lock Model Type
DescriptionSends information if the model of the lock is 101 or 150
Word Size1
Default Value0
Allowable Range0 to 0
Overview

This configuration is only accepted by configuration get command

It is a read only parameter. Default value depends on the door lock model type.

101 = ID Lock 101

150 = ID Lock 150

Options

Association Groups

Group ID1
LabelLifeline
Description
Maximum Nodes5
ControllerYes
Overview

Notification Reports are sent out unsolicated to device included in the association group.

Endpoints

Endpoint NameEndpoint 0
Endpoint Number0
Basic ClassBASIC_TYPE_ROUTING_SLAVE
Generic ClassGENERIC_TYPE_ENTRY_CONTROL
Specific ClassSPECIFIC_TYPE_SECURE_KEYPAD_DOOR_LOCK
Command Classes
Class Ver Basic NIF Sec UnSec
NO_OPERATION 1
ASSOCIATION_GROUP_INFO 1
DEVICE_RESET_LOCALLY 1
ZWAVE_PLUS_INFO 2
DOOR_LOCK 2
Door Lock
Door State
USER_CODE 1
CONFIGURATION 1
ALARM 4
Entry Notification
Alarm (emergency)
Alarm (burglar)
Alarm (raw)
MANUFACTURER_SPECIFIC 2
POWERLEVEL 1
FIRMWARE_UPDATE_MD 2
BATTERY 1
ASSOCIATION 2
VERSION 2
SECURITY 1

Reference Documents

ID Lock 150 installation and user manual ID-Lock-150-installation-and-user-manual.pdf
ID Lock 150 Z wave manual IDLock150-ZWave-UserManual-v2-1.pdf
Front panel front-silver-2x.png

First added to database on -0001-11-30 00:00:00. Current released version is 9.
Last updated by Vegar Røyset on 2019-09-19 08:44:07 (1 month ago).
Approved on 2019-09-22 12:28:44, and last exported on 2019-09-22 12:28:48.

Add comment