Device Overview

ManufacturerDevolo
Manufacturer ID0175
Nameph-pse02
Device DescriptionMultisound indoor siren
CategorySiren
References (Type:Id)0004:000A
Firmware VersionsAll
Protocol Version4.005
Library TypeLIB_SLAVE_ENHANCED
Always ListeningYes
Frequently ListeningNo
Supports RoutingYes
Supports BeamingYes
Supports SecurityNo
Maximum Data Rate40000
Device Overview

### NOTE ###

The XML used for adding this device to the database comes from the Devolo Home Control Alarmsiren (http://www.devolo.de/article/devolo-home-control-alarmsirene/). But it seems to be made by Zipato (https://www.zipato.com/product/multisound-indoor-siren).

### FEATURES ###

- Indoor multichannel siren that works with a a variety of Z-Wave networks/controllers, regardless of the manufacturer
- The new Z-Wave 500 series chip supports multichannel operationand higher data rates (9.6/40/100kbps)
- 110db sound level
- 6 sounds: Door Chime, Bi Bi Arm/Disarm, Intruder alarm, Ambulance, Police car
- Higher output power enhances communication range(+6dBm output power as compared to -2.5dBm 300 series)
- DC or Li-ion battery power (over 24 hours of battery life)
- Battery overcharge protection
- Very low power consumption
- Over-the-air firmware update
- Easy to install in EU/China/Taiwan wall sockets
- Tamperproof protection


### TECHNICAL SPECIFICATIONS ###

PROTOCOL: Z-Wave Plus

POWER
- DC 5V, Li-Ion battery (optional)
- BATTERY CAPACITY 1150mAh

OPERATING CONDITIONS:
- OPERATING VOLTAGE 3.7V
- OPERATING CURRENT 150 mA
- OPERATION TEMPERATURE -10°C ~ 40°C

RANGE
- Minimum 30 meters indoor
- 70 meters outdoor (meant for indoor use only)

DIMENSIONS
- DEVICE  DIMENSIONS 110 x 110 x 22 mm
- DEVICE WEIGHT 113g
- PACKAGE DIMENSIONS 117 x 50 x 117 mm
- PACKAGE WEIGHT 217g

FREQUENCY

    ph-pse02.au 921.42 MHz (AU)
    ph-pse02.eu 868.42 MHz (EU)
    ph-pse02.in 865.20 MHz (IN)
    ph-pse02.is 916.02 MHz (IS)
    ph-pse02.ru 869.02 MHz (RU)
    ph-pse02.us 908.42 MHz (US)

Source: https://www.zipato.com/product/multisound-indoor-siren

Inclusion Information

Press the tamper key three times within 1.5 seconds to enter the inclusion mode.

After successful inclusion, the LED will light up for 1 second.

Exclusion Information

Press the tamper key three times within 1.5 seconds to enter the exclusion mode.

Usage Information
Basic ClassBASIC_TYPE_ROUTING_SLAVE
Generic ClassGENERIC_TYPE_SWITCH_BINARY
Specific ClassSPECIFIC_TYPE_SIREN
Unique Referencephpse02

Configuration Parameters

Parameter 7 [ADVANCED]
Bitmask
LabelCostumer Function
Description NotificationReport/BinaryReport
Word Size4
Default Value4
Allowable Range0 to 65535
Overview

Notification Type,

0: Using Notification Report.

1: Using Sensor Binary Report.

Options
Parameter 29
Bitmask
LabelDisable Alarm
DescriptionDisable the alarm function.
Word Size4
Default Value0
Allowable Range0 to 1
Overview

Disable the alarm function.

1: Disable Alarm,

0: Enable Alarm.

Caution: After the power up, this configuration is always 0.

Options
Parameter 31
Bitmask0000000C
LabelAlarm Duration
DescriptionPlay alarm sound duration.
Word Size4
Default Value6
Allowable Range0 to 127
Overview

Play alarm sound duration, 1 tick is 30 seconds.

Default is 3 minutes, maximum is 63.5 minutes.

0 means never auto stop.

Options

Association Groups

Group ID1
LabelReport Message
DescriptionReport Message, e.g. tamper alarm
Maximum Nodes8
ControllerYes
Overview

Notice: The device supports 1 group.

The group 1 is for receiving the report message, like tamper event. And the group 8 nodes maximum

Endpoints

Endpoint NameEndpoint 0
Endpoint Number0
Basic ClassBASIC_TYPE_ROUTING_SLAVE
Generic ClassGENERIC_TYPE_SWITCH_BINARY
Specific ClassSPECIFIC_TYPE_SIREN
Command Classes
Class Ver Basic NIF Sec UnSec
NO_OPERATION 1
BASIC 1
SWITCH_BINARY 1
Switch
SWITCH_MULTILEVEL
SENSOR_BINARY 2
Binary Sensor
ASSOCIATION_GROUP_INFO 1
DEVICE_RESET_LOCALLY 1
ZWAVE_PLUS_INFO 1
CONFIGURATION 1
ALARM 4
Alarm (burglar)
Alarm (general)
Start Sound
MANUFACTURER_SPECIFIC 1
POWERLEVEL 1
FIRMWARE_UPDATE_MD 1
ASSOCIATION 2
VERSION 2

Reference Documents

Quick Installation Guide V1.2 ph-pse02-Zipato-Siren-User-Manual-v1-2.pdf
Product Image ph-pse02.jpg

First added to database on 2018-01-28 11:26:30. Current released version is 2.
Last updated by Bruce Osborne on 2019-08-11 20:39:22 (11 months ago).
Approved on 2019-08-11 22:37:37, and last exported on 2019-12-25 13:28:27.

You have no rights to post comments