Please note that editing on this site is now closed. We have moved to a new site right across the road at OpenSmartHouse. The new site offers a better user experience and existing users already registered here with permission to edit the database have been migrated and should be able to log on using the request password link.
Goto this device in the new site
  • Endpoint 0 has no command class linked to the basic class.

Device Overview

ManufacturerFibargroup
Manufacturer ID010F
NameFGR222
Device DescriptionRoller Shutter 2
CategoryBlinds
References (Type:Id)0301:1001,0302:1000,0302:3000,0302:4000
Firmware VersionsAll after 24.24
Protocol Version3.052
Library TypeLIB_SLAVE_ENHANCED
Always ListeningYes
Frequently ListeningNo
Supports RoutingYes
Supports BeamingYes
Supports SecurityNo
Maximum Data Rate40000
Device Overview

The device allows for controlling motors of roller blinds, awnings, venetian blinds, gates and others, which are single phase AC powered.

Inclusion Information

Fibaro Roller Shutter may be included into the Z-Wave network via the B-button or a push button connected to the S1 terminal. In addition, the module may be included in auto inclusion mode, by simply connecting the power supply.

Automatic Z-Wave network inclusion:

  1. Make sure the power supply is disconnected and a Roller Shutter is located within a direct Z-Wave network’s main controller communication range.
  2. Set the main controller into the learn mode (see main controllers operating manual).
  3. Connect the power supply to include the Roller Shutter in auto inclusion mode. 4) Fibaro Roller Shutter will be automatically detected and included into the Z-Wave network.

To disable the auto inclusion mode, press the B-button briefly, after connecting the module to the power supply.

Manual Z-Wave network inclusion: 

  1. Connect the power supply.
  2. Set the main controller into the learn mode (see main controllers operating manual).
  3. Triple click the B-button or a push button connected to the S1 terminal.
  4. Fibaro Roller Shutter will be detected and included into the Z-Wave network.
Exclusion Information
  1. Make sure the module is connected to the power supply.
  2. Set the main controller into the learn mode (see main controllers operating manual).
  3. Triple click the B-button or a push button connected to the S1 terminal.
Usage Information
Basic ClassBASIC_TYPE_ROUTING_SLAVE
Generic ClassGENERIC_TYPE_SWITCH_MULTILEVEL
Specific ClassSPECIFIC_TYPE_CLASS_B_MOTOR_CONTROL
Unique Referencefgr222

Configuration Parameters

Parameter 3
Bitmask
LabelReports type
Descriptionvalue should be set to 1 if the module operates in Venetian Blind mode.
Word Size1
Default Value0
Allowable Range0 to 1
Overview
Options
Option Value0
Option LabelBlind position using Z-Wave Command
Option Overview

Blind position reports sent to the main controller using Z-Wave Comman

Option Value1
Option LabelBlind position via Fibar Command
Option Overview

Blind position reports sent to the main controller using Fibar Command

Parameter 10
Bitmask
LabelRoller Shutter operating modes
Description
Word Size1
Default Value1
Allowable Range0 to 4
Overview
Options
Option Value0
Option LabelRoller Blind Mode, without positioning
Option Overview
Option Value1
Option LabelRoller Blind Mode, with positioning
Option Overview
Option Value2
Option LabelVenetian Blind Mode, with positioning
Option Overview
Option Value3
Option LabelGate Mode, without positioning
Option Overview
Option Value4
Option LabelGate Mode, with positioning
Option Overview
Parameter 12
Bitmask
LabelTurning time/ delay time
Descriptiondepending on mode, turning time or delay time
Word Size2
Default Value150
Allowable Range0 to 65535
Overview

In Venetian Blind mode (parameter 10 set to 2) the parameter determines time of full turn of the lamellas.

In Gate Mode (parameter 10 set to 3 or 4) the parameter defines the delay time after which an open gate starts closing.Type range

Options
Parameter 13
Bitmask
LabelLamellas positioning mode
DescriptionParameter influences the lamellas positioning in venetian blind mode
Word Size1
Default Value2
Allowable Range0 to 2
Overview

Parameter influences the lamellas positioning in venetian blind mode (parameter 10 set to 2)

Set slats back to previous position. In Venetian Blind Mode (parameter 10 set to 2) the parameter influences slats positioning in various situations. In any other operating mode the parameter value is irrelevant.
0 - Slats return to previously set position only in case of the main controller operation.
1 - Slats return to previously set position in case of the main controller operation, momentary switch operation, or when the limit switch is reached.
2 - Slats return to previously set position in case of the main controller operation, momentary switch operation, when the limit switch is reached or after receiving a “STOP” control frame (Switch Multilevel Stop).

Default setting: 1 Parameter size: 1 [byte]

Options
Option Value0
Option Labelonly in case of the main controller operation
Option Overview

0 - Slats return to previously set position only in case of the main controller operation.

Option Value1
Option Labeldefault - controller+switchlimit
Option Overview

default. 
1 - Slats return to previously set position in case of the main controller operation, momentary switch operation, or when the limit switch is reached. 

Option Value2
Option Labellike 1 + STOP control frame
Option Overview

2 - Slats return to previously set position in case of the main controller operation, momentary switch operation, when the limit switch is reached or after receiving a “STOP” control frame (Switch Multilevel Stop).

Parameter 14
Bitmask
LabelSwitch type
Descriptioneither Toggle switches or a single, momentary switch.
Word Size1
Default Value0
Allowable Range0 to 2
Overview

14. Switch type. The parameter settings are relevant for Roller Blind Mode and Venetian Blind Mode (parameter 10 set to 0, 1, 2). 0 - Momentary switches 1 - Toggle switches 2 - Single, momentary switch. (The switch should be connected to S1 terminal) Default setting: 0 Parameter size: 1 [byte]

Options
Option Value0
Option LabelMomentary switches
Option Overview
Option Value1
Option LabelToggle switches
Option Overview
Option Value2
Option LabelSingle, momentary switch.
Option Overview
Parameter 17
Bitmask
LabelDelay time after S2
Descriptiondelay till auto turned off or auto gate close
Word Size1
Default Value10
Allowable Range0 to 255
Overview

17. In Roller Blind Mode or Venetian Blind mode (parameter 10 set to 0, 1, 2) the parameter determines when the Roller Shutter relays are turned off after reaching a limit switch. In Gate Mode (parameter 10 set to 3 or 4) the parameter determines a time period after which a gate will start closing after a S2 contact has been disconnected. In this mode, time to turn off the Roller Shutter relays after reaching a limit switch is set to 3 seconds and cannot be modified.

Value of 0 means the gate will note close automatically.
Available settings: 0 - 255 (0,1-25,5s).
Default setting: 10 (1s).
Parameter size: 1 [byte]

Options
Parameter 18
Bitmask
LabelMotor operation detection
DescriptionPower threshold to be interpreted as reaching a limit switch.
Word Size1
Default Value10
Allowable Range0 to 255
Overview
Options
Parameter 22
Bitmask
LabelMotor operation time
DescriptionTime period for the motor to continue operation.
Word Size2
Default Value10
Allowable Range0 to 65535
Overview
Options
Parameter 29
Bitmask
LabelForced Roller Shutter calibration
Descriptionset to 1 will enter calibration mode
Word Size1
Default Value0
Allowable Range0 to 1
Overview

29. Forced Roller Shutter calibration. By modifying the parameters setting from 0 to 1 a Roller Shutter enters the calibration mode. The parameter relevant only if a Roller Shutter is set to work in positioning mode (parameter 10 set to 1, 2 or 4). 1 - Start calibration process Default setting: 0 Parameter size: 1 [byte]

Options
Option Value0
Option LabelDeactivated
Option Overview
Option Value1
Option LabelStart calibration process
Option Overview
Parameter 30
Bitmask
LabelResponse to General Alarm
Description
Word Size1
Default Value2
Allowable Range0 to 2
Overview
Options
Option Value0
Option LabelNo response to alarm frames
Option Overview
Option Value1
Option LabelOpen Blind
Option Overview
Option Value2
Option LabelClose Blind
Option Overview
Parameter 31
Bitmask
LabelResponse to Water Flood Alarm
Description
Word Size1
Default Value0
Allowable Range0 to 2
Overview
Options
Option Value0
Option LabelNo response to alarm frames
Option Overview
Option Value1
Option LabelOpen Blind
Option Overview
Option Value2
Option LabelClose Blind
Option Overview
Parameter 32
Bitmask
LabelResponse to Smoke, CO, CO2 Alarm
Description
Word Size1
Default Value1
Allowable Range0 to 2
Overview
Options
Option Value0
Option LabelNo response to alarm frames
Option Overview
Option Value1
Option LabelOpen Blind
Option Overview
Option Value2
Option LabelClose Blind
Option Overview
Parameter 33
Bitmask
LabelResponse to Temperature Alarm
Description
Word Size1
Default Value1
Allowable Range0 to 2
Overview
Options
Option Value0
Option LabelNo response to alarm frames
Option Overview
Option Value1
Option LabelOpen Blind
Option Overview
Option Value2
Option LabelClose Blind
Option Overview
Parameter 35
Bitmask
LabelManaging lamellas in response to alarm
Description0 no change, 1 extreme position
Word Size1
Default Value1
Allowable Range0 to 255
Overview

35. Managing slats in response to alarm. In Venetian Blind Mode (parameter 10 set to 2), the parameter determines how the slats will react upon alarm detection. In any other modes, the parameter value is not relevant. 0 - Do not change slats position - slats return to the last set position. 1 - Set slats to their extreme position. Default setting: 1 Parameter size: 1 [byte]

Options
Option Value0
Option LabelDo not change lamellas position
Option Overview
Option Value1
Option LabelSet lamellas to their extreme position
Option Overview
Parameter 40
Bitmask
LabelPower reports
Descriptionchange that needs to occur to trigger the power report
Word Size1
Default Value10
Allowable Range0 to 100
Overview

40. Power reports. Power level change that will result in new power value report being sent. The parameter defines a change that needs to occur in order to trigger the report. The value is a percentage of the previous report. Power report threshold available settings: 1-100 (1-100%). Value of 0 means the reports are turned off. Default setting: 10 (10%). Parameter size: 1 [byte]

Options
Parameter 42
Bitmask
LabelPeriodic power or energy reports
DescriptionTime to the next report. Value of 0 means the reports are turned off.
Word Size2
Default Value3600
Allowable Range0 to 65534
Overview
Options
Parameter 43
Bitmask
LabelEnergy reports
Description Energy threshold to trigger report
Word Size1
Default Value10
Allowable Range0 to 254
Overview

43. Energy reports. Energy level change which will result in new energy value report being sent. The parameter defines a change that needs to occur in order to trigger the report. Energy threshold available settings: 1-254 (0,01 - 2,54kWh). Value of 0 means the reports are turned off. Default setting 10 (0,1kWh). Parameter size: 1 [byte]

Options
Parameter 44
Bitmask
LabelSelf-measurement
Descriptionif power and energy reports are to sent to the main controller
Word Size1
Default Value0
Allowable Range0 to 1
Overview

44. Self-measurement. A Roller Shutter may include power and energy used by itself in reports sent to the main controller.
0 - Self-measurement inactive.
1 - Self-measurement active.
Default setting: 0
Parameter size: 1 [byte] 

Options
Option Value0
Option LabelDisabled
Option Overview
Option Value1
Option LabelActivated
Option Overview
Parameter 50
Bitmask
LabelScenes/ Associations activation
Descriptionwhether scenes or associations are activated by the switch keys
Word Size1
Default Value0
Allowable Range0 to 1
Overview

SCENES AND ASSOCIATIONS SETTINGS:
50. Scenes / Associations activation. Parameter determines whether scenes or associations are activated by the switch keys.
0 - Associations activation
1 - Scenes activation
Default setting: 0
Parameter size: 1 [byte]

Options
Option Value0
Option LabelAssociations Active
Option Overview
Option Value1
Option LabelScenes Active
Option Overview

Association Groups

Group ID1
LabelMomentary click
Description
Maximum Nodes16
ControllerNo
Overview
Group ID2
LabelMomentary hold
Description
Maximum Nodes16
ControllerNo
Overview
Group ID3
LabelController Updates
Description
Maximum Nodes1
ControllerYes
Overview

Endpoints

Endpoint NameEndpoint 0
Endpoint Number0
Basic ClassBASIC_TYPE_ROUTING_SLAVE
Generic ClassGENERIC_TYPE_SWITCH_MULTILEVEL
Specific ClassSPECIFIC_TYPE_CLASS_B_MOTOR_CONTROL
Command Classes
Class Ver Basic NIF Sec UnSec
NO_OPERATION 1
BASIC 1
SWITCH_BINARY 1
Switch
SWITCH_MULTILEVEL 3
Blinds Control
SCENE_ACTIVATION
Scene Number
SENSOR_MULTILEVEL 2
Sensor (power)
METER 2
Electric meter (watts)
Electric meter (kWh)
CONFIGURATION 1
MANUFACTURER_SPECIFIC 1
POWERLEVEL 1
PROTECTION 2
ASSOCIATION 1
VERSION 1
MULTI_INSTANCE_ASSOCIATION 1
MANUFACTURER_PROPRIETARY
Shutter position [deprecated]
Lamella position

Reference Documents

User Manual FGR-222-EN-A-v1-00.pdf
Product Image fgrm222.jpg

First added to database on 2018-01-08 23:31:50. Current released version is 4.
Last updated by sihui on 2019-05-05 18:43:25 (1 year ago).
Approved on 2019-05-05 18:43:32, and last exported on 2019-12-25 13:27:45.

Comments  
# Mark Hilbush 2019-01-20 20:23
Deleted config parameters 1 and 2 because they should be set using the PROTECTION command class.

You have no rights to post comments