Device Overview

ManufacturerDevolo
Manufacturer ID0175
NameMT2652
Device DescriptionScene Switch
CategoryWall Switch
References (Type:Id)0100:0101
Firmware VersionsAll
Protocol Version3.092
Library TypeLIB_SLAVE_ENHANCED
Always ListeningNo
Frequently ListeningNo
Supports RoutingYes
Supports BeamingYes
Supports SecurityNo
Maximum Data Rate40000
Device Overview

The Home Control Wall Switch lets you control your Home Control devices at the press of a button. It has two
different rocker switches.

Inclusion Information

Activate inclusion on the device by pressing any one of the four buttons for one second.

Exclusion Information

Activate exclusion on the device by pressing any one of the four buttons for one second.

Wakeup Information

Click button 2 in management mode.

Usage Information
Basic ClassBASIC_TYPE_ROUTING_SLAVE
Generic ClassGENERIC_TYPE_WALL_CONTROLLER
Specific ClassSPECIFIC_TYPE_BASIC_WALL_CONTROLLER
Unique Referencemt2652

Configuration Parameters

Parameter 1
Bitmask
LabelButton 1 and 3 pair mode
DescriptionButton 1 and 3 pair mode
Word Size1
Default Value1
Allowable Range0 to 255
Overview

In separate mode button 1 works with group 1, button 3 with groups 3. Click is On, Hold is dimming Up, Double click is Off, Click-Hold is dimming Down. In pair button 1/3 are Up/Down correspondingly. Click is On/Off, Hold is dimming Up/Down. Single clicks works with group 1, double click with group 3.

Options
Option Value0
Option LabelSeparately
Option Overview
Option Value1
Option LabelIn pair without double clicks
Option Overview
Option Value2
Option LabelIn pair with double clicks
Option Overview
Parameter 2
Bitmask
LabelButton 2 and 4 pair mode
DescriptionButton 2 and 4 pair mode
Word Size1
Default Value1
Allowable Range0 to 255
Overview

In separate mode button 2 works with group 2, button 4 with groups 4. Click is On, Hold is dimming Up, Double click is Off, Click-Hold is dimming Down. In pair button 2/4 are Up/Down correspondingly. Click is On/Off, Hold is dimming Up/Down. Single clicks works with group 2, double click with group 4.

Options
Option Value0
Option LabelSeparately
Option Overview
Option Value1
Option LabelIn pair without double clicks
Option Overview
Option Value2
Option LabelIn pair with double clicks
Option Overview
Parameter 11
Bitmask
LabelCommand to control Group A
DescriptionCommand sent to devices of control group A
Word Size1
Default Value8
Allowable Range0 to 255
Overview

Defines the command to be sent to devices of control group A when the related button is pressed.

In Switch On/Off only mode On command is sent on Dim Up, Off on Dim Down. In Scenes mode the scene ID sent is (10 * group + ActionID), where ActionID is: 1 = On, 2 = Off, 3 = Dim Up Start, 4 = Dim Down Start, 5 = Dim Up Stop, 6 = Dim Down Stop

Options
Option Value0
Option LabelDisabled
Option Overview
Option Value1
Option LabelSwitch On/Off/Dim (Basic Set/Switch Multilevel)
Option Overview
Option Value2
Option LabelSwitch On/Off only (send Basic Set)
Option Overview
Option Value3
Option LabelSwitch all
Option Overview
Option Value4
Option LabelSend Scenes
Option Overview
Option Value5
Option LabelSend Preconfigured Scenes
Option Overview
Option Value6
Option LabelControl devices in proximity
Option Overview
Option Value7
Option LabelControl door lock
Option Overview
Option Value8
Option LabelCentral scene to gateway (default)
Option Overview
Parameter 12
Bitmask
LabelCommand to control Group B
DescriptionCommand sent to devices of control group B
Word Size1
Default Value8
Allowable Range0 to 255
Overview

Defines the command to be sent to devices of control group B when the related button is pressed.

In Switch On/Off only mode On command is sent on Dim Up, Off on Dim Down. In Scenes mode the scene ID sent is (10 * group + ActionID), where ActionID is: 1 = On, 2 = Off, 3 = Dim Up Start, 4 = Dim Down Start, 5 = Dim Up Stop, 6 = Dim Down Stop

Options
Option Value0
Option LabelDisabled
Option Overview
Option Value1
Option LabelSwitch On/Off/Dim (Basic/Switch Multilevel)
Option Overview
Option Value2
Option LabelSwitch On/Off only (send Basic Set)
Option Overview
Option Value3
Option LabelSwitch all
Option Overview
Option Value4
Option LabelSend Scenes
Option Overview
Option Value5
Option LabelSend Preconfigured Scenes
Option Overview
Option Value6
Option LabelControl devices in proximity
Option Overview
Option Value7
Option LabelControl door lock
Option Overview
Option Value8
Option LabelCentral scene to gateway (default)
Option Overview
Parameter 13
Bitmask
LabelCommand to control Group C
DescriptionCommand sent to devices of control group C
Word Size1
Default Value8
Allowable Range0 to 255
Overview

Defines the command to be sent to devices of control group C when the related button is pressed.

In Switch On/Off only mode On command is sent on Dim Up, Off on Dim Down. In Scenes mode the scene ID sent is (10 * group + ActionID), where ActionID is: 1 = On, 2 = Off, 3 = Dim Up Start, 4 = Dim Down Start, 5 = Dim Up Stop, 6 = Dim Down Stop

Options
Option Value0
Option LabelDisabled
Option Overview
Option Value1
Option LabelSwitch On/Off/Dim (Basic/Switch Multilevel)
Option Overview
Option Value2
Option LabelSwitch On/Off only (send Basic Set)
Option Overview
Option Value3
Option LabelSwitch all
Option Overview
Option Value4
Option LabelSend Scenes
Option Overview
Option Value5
Option LabelSend Preconfigured Scenes
Option Overview
Option Value6
Option LabelControl devices in proximity
Option Overview
Option Value7
Option LabelControl door lock
Option Overview
Option Value8
Option LabelCentral scene to gateway (default)
Option Overview
Parameter 14
Bitmask
LabelCommand to control Group D
DescriptionCommand sent to devices of control group D
Word Size1
Default Value8
Allowable Range0 to 255
Overview

Defines the command to be sent to devices of control group D when the related button is pressed.

In Switch On/Off only mode On command is sent on Dim Up, Off on Dim Down. In Scenes mode the scene ID sent is (10 * group + ActionID), where ActionID is: 1 = On, 2 = Off, 3 = Dim Up Start, 4 = Dim Down Start, 5 = Dim Up Stop, 6 = Dim Down Stop

Options
Option Value0
Option LabelDisabled
Option Overview
Option Value1
Option LabelSwitch On/Off/Dim (Basic/Switch Multilevel)
Option Overview
Option Value2
Option LabelSwitch On/Off only (send Basic Set)
Option Overview
Option Value3
Option LabelSwitch all
Option Overview
Option Value4
Option LabelSend Scenes
Option Overview
Option Value5
Option LabelSend Preconfigured Scenes
Option Overview
Option Value6
Option LabelControl devices in proximity
Option Overview
Option Value7
Option LabelControl door lock
Option Overview
Option Value8
Option LabelCentral scene to gateway (default)
Option Overview
Parameter 21
Bitmask
LabelSend the following Switch All commands
Description
Word Size1
Default Value1
Allowable Range0 to 255
Overview
Options
Option Value1
Option LabelSwitch off only (default)
Option Overview
Option Value2
Option LabelSwitch on only
Option Overview
Option Value255
Option LabelSwitch all on and off
Option Overview
Parameter 22
Bitmask
LabelInvert buttons
Description
Word Size1
Default Value0
Allowable Range0 to 255
Overview
Options
Option Value0
Option LabelNo
Option Overview
Option Value1
Option LabelYes
Option Overview
Parameter 25
Bitmask
LabelBlock wake up even when Wake Up Interval is set
Description
Word Size1
Default Value1
Allowable Range0 to 255
Overview
Options
Option Value0
Option LabelWake up is blocked
Option Overview
Option Value1
Option LabelWakeup is not blocked (Default)
Option Overview
Parameter 30
Bitmask
LabelSend unsolicited Battery Report on Wake Up
Description
Word Size1
Default Value0
Allowable Range0 to 255
Overview
Options
Option Value0
Option LabelNo
Option Overview
Option Value1
Option LabelTo same node as wake up notification
Option Overview
Option Value2
Option LabelBroadcast to neighbours
Option Overview

Association Groups

Group ID1
LabelLifeline
DescriptionZ-Wave Plus Lifeline
Maximum Nodes10
ControllerYes
Overview
Group ID2
LabelControl Group A
DescriptionControl Group A, controlled by button 1 or single clicks of buttons 1 and 3
Maximum Nodes10
ControllerNo
Overview

Control Group A, controlled by button 1 or single clicks of buttons 1

Group ID3
LabelControl Group B
DescriptionControl Group B, controlled by button 2 or single clicks of buttons 2 and 4
Maximum Nodes10
ControllerNo
Overview
Group ID4
LabelControl Group C
DescriptionControl Group C, controlled by button 3 or double clicks of buttons 1 and 3
Maximum Nodes10
ControllerNo
Overview
Group ID5
LabelControl Group D
DescriptionControl Group D, controlled by button 4 or double clicks of buttons 2 and 4
Maximum Nodes10
ControllerNo
Overview

Endpoints

Endpoint NameEndpoint 0
Endpoint Number0
Basic ClassBASIC_TYPE_ROUTING_SLAVE
Generic ClassGENERIC_TYPE_WALL_CONTROLLER
Specific ClassSPECIFIC_TYPE_BASIC_WALL_CONTROLLER
Command Classes
Class Ver Basic NIF Sec UnSec
NO_OPERATION 1
BASIC 1
SWITCH_MULTILEVEL 1
Dimmer
SCENE_ACTIVATION 1
SCENE_CONTROLLER_CONF 1
ASSOCIATION_GROUP_INFO 1
DEVICE_RESET_LOCALLY 1
CENTRAL_SCENE 1
Scene Number
ZWAVE_PLUS_INFO 1
DOOR_LOCK 1
CONFIGURATION 1
MANUFACTURER_SPECIFIC 1
POWERLEVEL 1
BATTERY 1
WAKE_UP 1
ASSOCIATION 1
VERSION 1
MULTI_INSTANCE_ASSOCIATION 1
MULTI_CMD 1
SECURITY 1

Reference Documents

Product Image MT2652.png
User Manual Manual-devolo-Home-Control-Wall-Switch-com.pdf
Detailed Manual Devlo-SceneSwitch-Manual.pdf

First added to database on 2018-01-20 09:01:46. Current released version is 3.
Last updated by Scott Rushworth on 2018-09-20 22:21:25 (7 months ago).
Approved on 2018-09-20 22:21:31, and last exported on 2018-12-09 10:39:47.

Add comment


Security code
Refresh