Please note that editing on this site is now closed. We have moved to a new site right across the road at OpenSmartHouse. The new site offers a better user experience and existing users already registered here with permission to edit the database have been migrated and should be able to log on using the request password link.
Goto this device in the new site

Device Overview

ManufacturerAEON Labs
Manufacturer ID0086
NameDSC10
Device DescriptionHeavy Duty Smart Switch
CategoryPower Outlet
References (Type:Id)0003:000A
Firmware VersionsAll
Protocol Version
Library TypeUnknown
Always ListeningYes
Frequently ListeningNo
Supports RoutingYes
Supports BeamingNo
Supports SecurityNo
Maximum Data Rate
Device Overview

Aeotec by Aeon Labs Heavy Duty Smart Switch Gen5.

Heavy Duty Smart Switch Gen5 has been crafted to power connected lighting using Z-Wave Plus. It is powered by Aeotec’s Gen5 technology. 


To see whether Heavy Duty Smart Switch Gen5 is known to be compatible with your Z-Wave system or not, please reference our Z-Wave gateway comparison listing. The technical specifications of Heavy Duty Smart Switch Gen5can be viewed at that link.

Familiarize yourself with your Heavy Duty Smart Switch Gen5.

Action button: Used for Heavy Duty Smart Switch Z-Wave network inclusion and exclusion and to manually turn on or off.

Status LED: Indicates your Heavy Duty Smart Switch's status. (While unpaired, this LED will blink slowly constantly).

Terminals: There are two groups of terminals. As marked, mains power is to be connected to AC Power and the electric load to Load.

Heavy Duty Smart Switch Gen5 current can not exceed 40 amps.

Inclusion Information

Your Heavy Duty Smart Switch must be paired with a Z-Wave network  before it can receive wireless commands or report the energy consumption of the attached electronics.

 

Note: The LED on your Heavy Duty Smart Switch will blink if it is not currently paired with a Z-Wave network. 

Tip: Turn off any devices connected to your Heavy Duty Smart Switch before adding or removing it to/from a Z-Wave network. This will help to prevent load damage. 

Adding your Heavy Duty Smart Switch Gen5 to a Z-Wave network.

Pairing your Heavy Duty Smart Switch Gen5 into your existing Z-Wave network.

1. Place your gateway or controller into Z-Wave pair or inclusion mode. (Please refer to your controller/gateway manual on how to do this)

2. Press the Action Button on your Switch.

3. If your switch has been successfully linked to your network, its LED will no longer blink. If linking was unsuccessful, the LED will continue to blink.

Exclusion Information

Unpairing your Heavy Duty Smart Switch Gen5 from your existing Z-Wave network

1. Place your gateway or controller into Z-Wave unpair or exclusion mode. (Please refer to your controller/gateway manual on how to do this)

2. Press the Action Button on your Switch.

3. If your switch has been successfully unlinked to your network, its LED will begin to blink. If linking was unsuccessful, the LED will return to its last LED state.

Usage Information

Turn your Heavy Duty Smart Switch Gen5 on or off.

Your Heavy Duty Smart Switch can be turned on or off through the use of  Z-Wave commands built into Z- Wave certified controllers and gateways. The specific Z-Wave commands supporting this function are the Basic Command Class and Binary Switch Command Class. 

Monitoring power consumption.

Your Heavy Duty Smart Switch can report Watts energy usage or kWh energy usage to a Z-Wave gateway or controller. If this function is supported by the gateway/controller, your energy consumption will be displayed within its user interface. The specific Z-Wave commands supporting energy monitoring are the Meter Command Class and Multilevel Sensor Command Class. Automatic reports go to association group 1, which is setup via the  Association Command Class. 

More advanced configurations.

The Smart Switch Gen5 has a longer list of device configurations that you can do with Smart Switch Gen5. 

You can find the configuration sheet here: https://aeotec.freshdesk.com/helpdesk/attachments/6052990296

The temperature sensor only measures the internal temperature of product (Circuit board).

Basic ClassBASIC_TYPE_ROUTING_SLAVE
Generic ClassGENERIC_TYPE_SWITCH_BINARY
Specific ClassSPECIFIC_TYPE_POWER_SWITCH_BINARY
Unique Referencedsc10

Configuration Parameters

Parameter 3
Bitmask
LabelCurrent Overload Protection
DescriptionSee overview
Word Size1
Default Value0
Allowable Range0 to 1
Overview

Load will be closed when the Current more than 39.5A and the time more than 5 seconds.

Options
Option Value0
Option LabelActivate Overload Protection
Option Overview
Option Value1
Option LabelDeactivate Overload Protection
Option Overview
Parameter 20
Bitmask
LabelOutput Load Status
DescriptionConfigure the output load status after re‐power on.
Word Size1
Default Value0
Allowable Range0 to 2
Overview
Options
Option Value0
Option LabelLast Status
Option Overview
Option Value1
Option LabelAlways ON
Option Overview
Option Value2
Option LabelAlways OFF
Option Overview
Parameter 80
Bitmask
LabelNotification on Status Change
DescriptionThe type of report to send when the device status changes
Word Size1
Default Value0
Allowable Range0 to 2
Overview
Options
Option Value0
Option LabelNothing
Option Overview
Option Value1
Option LabelHail
Option Overview
Option Value2
Option LabelBasic CC Report
Option Overview
Parameter 90
Bitmask
LabelEnables/disables parameter 91/92
Description
Word Size1
Default Value0
Allowable Range0 to 1
Overview
Options
Option Value0
Option LabelEnable parameters 91 and 92
Option Overview
Option Value1
Option LabelDisable parameters 91 and 92
Option Overview
Parameter 91
Bitmask
LabelMinimum Change to send Report (Watt)
DescriptionThe value represents the minimum change in wattage for a Report to be sent.
Word Size2
Default Value50
Allowable Range0 to 32000
Overview
Options
Parameter 92
Bitmask
LabelMinimum Change to send Report (%)
DescriptionThe minimum change in wattage Percent for a report to be sent
Word Size1
Default Value10
Allowable Range0 to 100
Overview
Options
Parameter 200
Bitmask
LabelPartner ID
Description
Word Size1
Default Value0
Allowable Range0 to 1
Overview
Options
Option Value0
Option LabelAeon Labs
Option Overview
Option Value1
Option LabelOther
Option Overview
Parameter 252
Bitmask
LabelLock/unlock Configuration Changes
Description
Word Size1
Default Value0
Allowable Range0 to 1
Overview
Options
Option Value0
Option LabelUnlocked
Option Overview
Option Value1
Option LabelLocked
Option Overview

Association Groups

Group ID1
LabelGroup 1
Description
Maximum Nodes5
ControllerYes
Overview
Group ID2
LabelGroup 2
Description
Maximum Nodes5
ControllerNo
Overview

Endpoints

Endpoint NameEndpoint 0
Endpoint Number0
Basic ClassBASIC_TYPE_ROUTING_SLAVE
Generic ClassGENERIC_TYPE_SWITCH_BINARY
Specific ClassSPECIFIC_TYPE_POWER_SWITCH_BINARY
Command Classes
Class Ver Basic NIF Sec UnSec
BASIC 1
SWITCH_BINARY 1
Switch
SWITCH_ALL 1
SCENE_ACTIVATION 1
SCENE_ACTUATOR_CONF 1
SENSOR_MULTILEVEL 5
METER 3
CONFIGURATION 1
MANUFACTURER_SPECIFIC 2
HAIL 1
ASSOCIATION 1
VERSION 1

Reference Documents

Heavy Duty Smart Switch Gen5 technical specifications ES---Heavy-Duty-Smart-Switch-Gen5-V3-26.pdf
Product image outdoor-z-wave-switch.jpg

First added to database on 2018-03-10 11:53:25. Current released version is 3.
Last updated by Dmitry on 2019-06-05 21:14:16 (1 year ago).
Approved on 2019-06-06 06:47:42, and last exported on 2019-12-25 13:25:43.

Comments  
# Fredrik Karlsson 2018-12-05 11:52
I have not gone through all the parameters since I do not own this device myself at the moment. I will get one though, and will update according to what is said in the EU version of the manual.

You have no rights to post comments