Please note that editing on this site is now closed. We have moved to a new site right across the road at OpenSmartHouse. The new site offers a better user experience and existing users already registered here with permission to edit the database have been migrated and should be able to log on using the request password link.
Goto this device in the new site
  • Endpoint 0 has no command class linked to the basic class.

Device Overview

ManufacturerHomeSeer Technologies
Manufacturer ID000C
NameHS-WV100+
Device DescriptionZ-Wave water valve controller
CategoryValve
References (Type:Id)0003:0002
Firmware VersionsAll
Protocol Version4.024
Library TypeLIB_SLAVE_ENHANCED
Always ListeningYes
Frequently ListeningNo
Supports RoutingYes
Supports BeamingYes
Supports SecurityNo
Maximum Data Rate40000
Device Overview

HS-WV100+ is a valve controller system that is designed to control the flow of water when Z-Wave commands are received. It may be used with compatible home automation systems (and sensors) to mitigate water damage when leaks are detected. It may also be used for a variety of other automated or remotely controlled water or irrigation needs. 

Inclusion Information
  1. Put your home automation controller into ‘inclusion’ mode. Consult your system’s manual for details.
  2. Press the “program” button on the water valve controller unit. Wait for the process to finish.
Exclusion Information
  1. Put your home automation controller into ‘exclusion’ mode. Consult your system’s manual for details.
  2. Press the “program” button on the water valve controller unit. Wait for the process to finish
Usage Information

OPERATION

Remote Valve Operation (use this procedure for remote or automatic control of the water valve)

HS-WV100+ valve controller behaves like a Z-Wave “binary” device, with “ON” and “OFF” values, when added to most home automation systems.

  • Open Valve - Issue “ON” command from Z-Wave controller or Z-Wave compatible home automation system.
  • Close Valve - Issue “OFF” command from Z-Wave controller or Z-Wave compatible home automation system.

Local Valve Operation (use this procedure for convenient local control of the water valve)

  • Open Valve - Press and release the ’Open’ button on the water valve controller unit to open the water valve.
  • Close Valve - Press and release the ’Close’ button on the water valve controller unit to close the water valve.

Local Manual Valve Operation (for use in the event of a power failure or water valve controller failure)

  • Open Valve - Pull the thumbwheel on the water valve housing up and rotate wheel counter-clockwise.
  • Close Valve - Pull the thumbwheel on the water valve housing up and rotate wheel clockwise.
Basic Class
Generic Class
Specific ClassSPECIFIC_TYPE_NOT_USED
Unique Referencehswv100

Configuration Parameters

None

Association Groups

Group ID1
LabelLifeline
Description
Maximum Nodes4
ControllerYes
Overview

Endpoints

Endpoint NameEndpoint 0
Endpoint Number0
Basic ClassBASIC_TYPE_ROUTING_SLAVE
Generic ClassGENERIC_TYPE_SWITCH_BINARY
Specific ClassSPECIFIC_TYPE_VALVE_OPEN_CLOSE
Command Classes
Class Ver Basic NIF Sec UnSec
NO_OPERATION 1
BASIC 1
SWITCH_BINARY 1
Switch
ASSOCIATION_GROUP_INFO 1
DEVICE_RESET_LOCALLY 1
ZWAVE_PLUS_INFO 1
ALARM 4
Alarm (system)
MANUFACTURER_SPECIFIC 1
POWERLEVEL 1
FIRMWARE_UPDATE_MD 1
ASSOCIATION 2
VERSION 2

Reference Documents

User Manual HS-WV100-Manual.pdf
Product Image HS-WV100-300.png

First added to database on -0001-11-30 00:00:00. Current released version is 2.
Last updated by Bruce Osborne on 2020-07-09 10:57:51 (5 months ago).
Approved on 2020-07-09 10:58:20, and last exported on 2020-07-29 21:29:54.

You have no rights to post comments