Device Overview

ManufacturerLinear Corp
Manufacturer ID014F
NameFS20Z
Device DescriptionIsolated Contact Fixture Module
CategoryWall Switch
References (Type:Id)5246:3133
Firmware VersionsAll
Protocol Version3.042
Library TypeLIB_CONTROLLER_BRIDGE
Always ListeningYes
Frequently ListeningNo
Supports RoutingYes
Supports BeamingNo
Supports SecurityNo
Maximum Data Rate
Device Overview

z-Wave Radio Frequency (RF) Controlled, 120 VAC Scene Capable, Isolated Contact Fixture Module

Inclusion Information
  1. Prepare the Controller to include a unit to the network, by adding it to a group (method of adding a node to the network). Refer to Controller instructions.
  2. The FS20Z-1 must be in its permanently installed location. Press the button on the FS20Z-1 once.
  3. You should see an indication on your Controller that the “DEVICE WAS INCLUDED” in the network.
Exclusion Information

Remove the module by tapping the button three times, then press and hold.

Usage Information
Basic ClassBASIC_TYPE_ROUTING_SLAVE
Generic ClassGENERIC_TYPE_SWITCH_BINARY
Specific ClassSPECIFIC_TYPE_SCENE_SWITCH_BINARY
Unique Referencefs20z

Configuration Parameters

Parameter 3
Bitmask
LabelNight Light
DescriptionNightlight: LED turns ON when the switch is turned OFF
Word Size1
Default Value1
Allowable Range0 to 255
Overview

In night-light mode the LED on the switch will turn ON when the switch is turned OFF.

Options
Option Value0
Option LabelNo
Option Overview
Option Value1
Option LabelYes
Option Overview

Association Groups

None

Endpoints

Endpoint NameEndpoint 0
Endpoint Number0
Basic ClassBASIC_TYPE_ROUTING_SLAVE
Generic ClassGENERIC_TYPE_SWITCH_BINARY
Specific ClassSPECIFIC_TYPE_SCENE_SWITCH_BINARY
Command Classes
Class Ver Basic NIF Sec UnSec
NO_OPERATION 1
BASIC 1
SWITCH_BINARY 1
Switch
SCENE_ACTIVATION 1
CONFIGURATION 1
MANUFACTURER_SPECIFIC 1
VERSION 1

Reference Documents

User Manual FS20Z1-manual.pdf
Product Image FS20Z.jpg

First added to database on 2016-11-11 23:44:54. Current released version is 2.
Last updated by sihui on 2018-07-22 06:29:50 (11 months ago).
Approved on 2018-07-22 06:29:55, and last exported on 2018-12-09 10:39:52.

Add comment


Security code
Refresh