Device definition contains errors

  • Device category is not set.
  • At least one manufacturers product image must be uploaded

These errors must be removed before the device can be approved

  • Inclusion information is not set
  • Exclusion information is not set
  • Parameter 3 description is too long - shorten and use the overview field.
  • Parameter 4 description is too long - shorten and use the overview field.
  • Parameter 7 description is too long - shorten and use the overview field.
  • Parameter 8 description is too long - shorten and use the overview field.
  • Parameter 9 description is too long - shorten and use the overview field.
  • Parameter 10 description is too long - shorten and use the overview field.
  • Parameter 11 description is too long - shorten and use the overview field.
  • Parameter 12 description is too long - shorten and use the overview field.
  • Parameter 3 description contains HTML. Description should be a single line of text with additional information put in the overview field.
  • Parameter 4 description contains HTML. Description should be a single line of text with additional information put in the overview field.
  • Parameter 8 description contains HTML. Description should be a single line of text with additional information put in the overview field.
  • Parameter 10 description contains HTML. Description should be a single line of text with additional information put in the overview field.
  • Parameter 12 description contains HTML. Description should be a single line of text with additional information put in the overview field.

Device Overview

ManufacturerJasco Products
Manufacturer ID0063
NameZW3003, GE 12724
Device DescriptionIn-Wall Dimmer
Category
References (Type:Id)4944:3031
Firmware VersionsAll
Protocol Version3.067
Library TypeLIB_SLAVE_ROUTING
Always ListeningYes
Frequently ListeningNo
Supports RoutingYes
Supports BeamingYes
Supports SecurityNo
Maximum Data Rate40000
Device Overview

Also goes by GE / Jasco catalog number 12724.

Inclusion Information
Exclusion Information
Basic ClassBASIC_TYPE_ROUTING_SLAVE
Generic ClassGENERIC_TYPE_SWITCH_MULTILEVEL
Specific ClassSPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
Unique Referencezw3003

Configuration Parameters

Parameter 3
Bitmask
LabelNight Light
DescriptionDefines the behavior of the blue LED.
Default is Night Light mode where LED is on when switch is off.
Word Size1
Default Value0
Allowable Range0 to 255
Overview
Options
Option Value0
Option LabelLED on when switch is OFF
Option Overview
Option Value1
Option LabelLED on when switch is ON
Option Overview
Option Value2
Option LabelLED always off
Option Overview
Parameter 4
Bitmask
LabelInvert Switch
DescriptionInvert the ON/OFF Switch State.
Setting this parameter to Yes will change the top of the switch to OFF and the bottom to ON.
Note: If you invert the switches and also install the product upside down, the load will now be control
Word Size1
Default Value0
Allowable Range0 to 255
Overview
Options
Option Value0
Option LabelNo
Option Overview
Option Value1
Option LabelYes
Option Overview
Parameter 5
Bitmask
LabelIgnore Start-Level (Receiving)
DescriptionThis dimmer will start dimming from its current level.
Word Size1
Default Value0
Allowable Range0 to 255
Overview
Options
Option Value0
Option LabelNo
Option Overview
Option Value1
Option LabelYes
Option Overview
Parameter 7
Bitmask
LabelOn/Off Command Dim Step
DescriptionIndicates how many levels the dimmer will change for each dimming step.
Word Size1
Default Value1
Allowable Range1 to 99
Overview
Options
Parameter 8
Bitmask
LabelOn/Off Command Dim Rate
DescriptionThis value indicates in 10 millisecond resolution.
This sets how often the dim level will change. For example, if you set this parameter to 1, then every 10ms the dim level will change. If you set it to 255, then every 2.55 seconds the
Word Size1
Default Value3
Allowable Range1 to 255
Overview
Options
Parameter 9
Bitmask
LabelLocal Control Dim Step
DescriptionIndicates how many levels the dimmer will change for each dimming step.
Word Size1
Default Value1
Allowable Range1 to 99
Overview
Options
Parameter 10
Bitmask
LabelLocal Control Dim Rate
DescriptionThis value indicates in 10 millisecond resolution.
This sets how often the dim level will change. For example, if you set this parameter to 1, then every 10ms the dim level will change. If you set it to 255, then every 2.55 seconds the
Word Size1
Default Value3
Allowable Range1 to 255
Overview
Options
Parameter 11
Bitmask
LabelALL ON/ALL OFF Dim Step
DescriptionIndicates how many levels the dimmer will change for each dimming step.
Word Size1
Default Value1
Allowable Range1 to 99
Overview
Options
Parameter 12
Bitmask
LabelALL ON/ALL OFF Dim Rate
DescriptionThis value indicates in 10 millisecond resolution.
This sets how often the dim level will change. For example, if you set this parameter to 1, then every 10ms the dim level will change. If you set it to 255, then every 2.55 seconds the
Word Size1
Default Value3
Allowable Range1 to 255
Overview
Options

Association Groups

None

Endpoints

Endpoint NameEndpoint 0
Endpoint Number0
Basic ClassBASIC_TYPE_ROUTING_SLAVE
Generic ClassGENERIC_TYPE_SWITCH_MULTILEVEL
Specific ClassSPECIFIC_TYPE_POWER_SWITCH_MULTILEVEL
Command Classes
Class Ver Basic NIF Sec UnSec
NO_OPERATION 1
BASIC 1
SWITCH_MULTILEVEL 1
Dimmer
SWITCH_ALL 1
CONFIGURATION 1
MANUFACTURER_SPECIFIC 1
NODE_NAMING 1
VERSION 1

Reference Documents

Upload a manufacturers product image here.

User Manual 45612wb-in-wall-dimmer.pdf

Current released version is 0
Last updated by Super User on 2017-04-29 21:51:36 (1 year ago).
Approved on 2017-04-29 21:51:56, and last exported on 2018-05-21 18:37:32.

Add comment


Security code
Refresh